In the production and processing industry of blister products, it is common to encounter problems in the manufacturing process, and how to solve the problems is the key. Suzhou Broad AEON New Materials Co., Ltd. has been specializing in the production and processing of super-large, special-shaped and thick blister sheets in the blister industry for 16 years. It often sums up its experience and studies how to solve the quality problems in this area, so as to avoid producing a large number of The purpose of the defective product. Common quality problems in the production process include "crystal points, bubbles, thickness, scratches, wire drawing" and so on.

Crystal point problem: Our common crystal point quality problem is that there will be little scum on the surface of the blister product. The reason for the existence of the scum may be because the sheet manufacturer produced it with some impurities during the production, but it appeared The problem of crystal points.

Bubble problem: The bubble is mainly caused by a bubble point on the surface of the material, which is also the reason for the production of the sheet manufacturer. Solution: If you find such a problem, you can find your own material supplier to reflect or improve the problem on the sheet.

Thickness problem: The thickness of the product in the blister product is caused by the temperature adjustment on the large machine, the placement position of the shelf, and the uneven thickness of the material in the province. The solution: the temperature of the large machine should be softened according to the material itself If you put it on the shelf, pay more attention to the curvature and position of the shelf and the mold. If it is the problem of the sheet itself, you still have to go to the sheet supplier.